EN
ENGLISH
Nilfi sk ALTO Operator’s Manual (EN) - SCRUBTEC 866, 871, 866, Boost 8 and 871C FORM NO. 71492A - 57 -
BRUSH HEAD ASSY - SCRUBTEC BOOST 8
Item Ref. No. Qty Description
1 E04016 2 Spring
2 170860 2 Washer, Flat 5/16
3 722030 1 Clamp, Hose
4 782002 3 Clamp, Manifold
5 925589 1 Pin, Roll
6 56001881 4 Scr, Flt Soc 1/4-20 NOTE 1 TSBCL2010-12
7 962139 4 Screw, 1/4-20x.625 Hex Cap
8 88618A 1 Nut, M12 Nylon Insert
9 980638 2 Washer, 3/8 Lock
10 980646 4 Washer, 1/4” Flat
11 980648 1 Washer 17/32 X 1 1/16 Plain
12 980657 1 Washer, Lock 1/4
13 997001 1 Pad, Red, 28”
14 56109717 1 Tube Jack Motor
15 10309A 1 Tube Drip 28”
16 30048A 4 Guide, Wheel
17 30206A 1 Bumper
18 1 Shield Boost Bearing NOTE 1 / NOTE 2 / TSBCL2010-12
19 56381491 1 Plate Driver
20 56380188 1 Flex Plate Assy-28 NOTE 1 / TSBCL2010-12
21 30670A 2 Spacer, Nylon
22 30671A 2 Spacer, Nylon
23 30680A 1 Hose, Solution (Flex)
24 56390072 1 Motor, 24vdc NOTE 3
[ ] 11055A 1 Brush Motor Replacement Kit (for 56390072)
[ ] 56412287 1 Carbon Brushes (for 56380247)
25 50248A 1 Clamp, Hose
26 50736A 1 Bearing
27 56380235 1 Isolator Kit Boost 28”,32” NOTE 1 TSBCL2010-12
29 61425A 1 Retainer, Bumper
30 61724A 1 Retainer, Eccentric
31 56381724 1 Plate-Upper 28
32 61733B 2 Bracket, Lift
33 1 Eccentric NOTE 2
34 61775A 1 Retainer, Bearing
35 61782A 4 Sleeve, Guide Wheel
36 56381532 2 Stud Stablizer_Short
37 61935A 1 Arm, Lift, Right
38 61936A 1 Arm, Lift, Left
39 61938A 1 Guard, Front
40 80054A 2 Screw, M10-1.5 X40mm
41 80103A 2 Bolt, 3/8-24 X 1.0 Hex
42 80162A 4 Nut, M10 Hex
43 80252A 1 Screw, 1/4-20 X 1 HH S.S.
44 80296A 5 Screw #10-24 X 7/16 Type 23
45 80298A 2 Screw, 1/4-20 X 2.00 Hex Cap
46 80317A 4 Washer Bowed .455 Id X .740 O.D.
47 81217A 13 Nut, 1/4-20 Hex Esna
48 88619A 1 Scr, M12-1.75 X 160mm Hex
49 56381989 4 Shoulder Bolt - BOOST
50 84237A 3 Screw, 10-32 X .50 P.H.
51 85301A 4 Screw, 1/4-20 X 1 1/4 C.R.P.H.
52 85395A 3 Screw, 1/4-20 X 1/2” P.H.
53 87607A 4 Washer, Nylon 1.25 X .52 X .06 Flat
54 88612A 2 Washer, Lock M10
55 56381702 1 Decal-Boost Embossed
56 81220A 12 Nut-Serrated Flange
57 71017A 2 Label, Moving Parts
* = Optional, Not Included
NOTE 1: Customers ordering parts for machines built before April 2010 need to order 28” Flex Plate Kit 56380210 to replace any or all of these Items for
repair.
NOTE 2: Order Eccentric & Shield Kit 56380246 to replace these components.
NOTE 3: Motor 56390072 replaced Motor 56380247 in production effective February 2012.
revised 12/11
To Next Page
Loading...
Need help?
General
