Ninja BL201 User Manual

7
1-877-646-5288
Before First Use
CAUTION: Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, bowl, Nutri Ninja
®
cups, dough paddle
and blade assemblies in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades.
WARNING: Handle the blade assemblies with care
when washing, as the blades are very sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The bowl, Nutri Ninja
®
cups, lids, dough paddle
and blade assemblies are all dishwasher safe. It is
recommended that the lids, dough paddle and blade
assemblies be placed on the top rack. Ensure that the
dough paddle and blade assemblies are removed from
the containers before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
IMPORTANT: When mixing dough. Mix dough
for up to 1 minute, then let appliance rest for
1 minute before mixing again.
WARNING: Chopping
Blade Assembly is
sharp and not locked
in place. If using the
pour spout, ensure the
lid is fully locked onto
the pitcher. Failure to
do so will result in a
risk of laceration.
WARNING: Chopping
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Chopping
Blade Assembly first,
holding it by the shaft.
Failure to do so will
result in a risk of
laceration.

Ninja BL201 Specifications

General

Brand	Ninja
Model	BL201
Category	Blender
Language	English