Ninja BL201 User Manual

8
www.ninjakitchen.com
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
NOTE: Do not blend ice cubes without adding a liquid
or the product may overheat.
4 Place the Nutri Ninja blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
5 Turn the Nutri Ninja cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja cup clockwise until it
is locked in place, you will hear a click when the lock is
engaged. (Fig. 2)
Assembly and Use of the Nutri Ninja
®
cup
6 Press down on the top of the cup in short intervals to
activate. (Fig. 3)
7 When you have reached your desired consistency, stop
the appliance by removing your hand from the Nutri
Ninja cup. Then turn the Nutri Ninja cup to the right
(Fig. 4) and pull straight up to remove. (Fig. 5)
8 Turn the cup upright and remove the Nutri Ninja blade
assembly by twisting the blade assembly counter-
clockwise. (Fig. 6)
9 Do not store blended contents with the Nutri Ninja blade
assembly attached.
10 Place the To-Go drinking lid onto the Nutri Ninja cup,
twist to seal and enjoy!
11 Be sure to store the Nutri Ninja blade assembly
attached to an empty cup when not in use.
12 Make sure that the motor base is unplugged when not in
use.
Fig. 3
ASSEMBLY PULSE REMOVAL
Fig. 2Fig. 1
For best results, use short “PULSES”... Practice makes perfect!!
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Do not store
ingredients before or after blending in the Nutri Ninja cup with the blade assembly attached. Some foods
may contain active ingredients or release gases which will expand if left in a sealed container, resulting
in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 4 Fig. 5
Fig. 6

Ninja BL201 Specifications

General

Brand	Ninja
Model	BL201
Category	Blender
Language	English