Ninja BL685 User Manual

USE
Fig. 6 Fig. 7
10 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals .
11 When you have reached your desired consistency, stop
the appliance by pressing the power button (6) and
wait for the stacked blade assembly to stop turning .
(Fig . 7)
12 To remove the lid , press the release button on the lid,
pull the lid handle up to a go
0
angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base. (Fig. 7, Fig . 8)
.A CAUTION: Never insert your hands in the pitcher
as the blades are sharp . Always use a spatula to
dislodge food that has stuck to the sides of the
pitcher.
BL685_Series_lB_ 170428_press.indd 7
REMOVAL
Fig. 8 Fig. 9
13 Open the pour spout cap and use the spout to empty
liquid contents.
14 For thicker consistencies , remove the lid and stacked
blade assembly carefully (by its shaft) , then empty
contents from the container . To remove the lid, press
the release button on the lid and pull the lid handle
up to a go
0
angle and lift the lid off the pitcher. Then ,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally ,
empty contents from the pitcher .
15 Make sure that the unit is unplugged when not in use .
16 To release the motor base from the counter or table top ,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you . (Fig. 9)
ninjakilchen.com [ 6
2017-05-01 9:08
AM I
Case 2:23-cv-02144 Document 1-1 Filed 03/20/23 Page 7 of 16 PageID #: 18

Ninja BL685 Specifications

General

Brand	Ninja
Model	BL685
Category	Blender
Language	English