Ninja BL685 User Manual

Assembly and Use of the Nutri Ninja® Cup
A WARNING: Handle the Pro Extractor Blades<» Assembly with care , as the blades are sharp .
A
WARNING : Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to
shatter, which may cause personal injury .
A
WARNING : Never leave the appliance unattended while in use .
A
CAUTION : Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being
burned .
A
CAUTION : Remove the Pro Extractor Blades Assembly from the Nutri Ninja cup upon completion of blending . Do not
store ingredients before or after blending them in the cup with the blade assembly attached . Some foods may contain
active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure
buildup that can pose a risk of injury . For ingredient storage in the cup, use only Spout Lid to cover.
IMPORTANT : Make sure that the motor base is plugged in for use .
ASSEMBLY PULSE
Fig . 1 Fig . 3
1
Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
4 Place the Pro Extractor Blades ® Assembly onto the cup
and tightly screw it on clockwise until you have a good
seal. (Fig. 1)
5 Turn the Nutri Ninja cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja cup clockwise until it
is locked in place , you will hear a click when the lock is
engaged. (Fig. 2) Turn the power button on, the Nutri
Ninja button and Pulse will illuminate .
6
Press down on the Pulse button in short intervals to
break down tough ingredients . Press the Nutri Ninja
button to activate the 30 second continuous run .
(Fig. 3) The unit will stop after 30 seconds.
7 Once you have reached your desired consistency, turn
the power button off and wait for the Pro Extractor
Blades Assembly to stop turning. Turn the Nutri Ninja
cup counterclockwise and pull straight up to remove.
(Fig. 4, Fig . 5)
7 I B? 1-877-646-5288
BL685_Series_lB_ 170428_press.indd 8
REMOVAL
8
T
I
Fig . 4 Fig . 5
Fig. 6
8
Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the blade assembly
counterclockwise.
9 Turn the cup upright and remove the Pro Ex tractor
Blades Assembly by twisting counter clockwise.
(Fig. 6)
10 Do not store blended contents with the Pro Extractor
Blade Assembly attached .
11 Place the spout lid onto the Nutri Ninja cup, twist to
seal and enjoy!
12 For storage, only use the spout lid to cover.
13 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
14 Make sure that the motor base is unplugged when
not in use.
15 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and .
towards you. f
NOTE: To order additional Nutri Ninja
Cups, please visit our website : ninjakitchen . com or
feel free to contact customer service: 1-877-646-5288.
2017-05-01 9:08 AM I
Case 2:23-cv-02144 Document 1-1 Filed 03/20/23 Page 8 of 16 PageID #: 19

Ninja BL685 Specifications

General

Brand	Ninja
Model	BL685
Category	Blender
Language	English