Ninja Master Prep

8
Using the Master Prep
®
Pitcher
WARNING: DO NOT try to place the
blades onto the power head and then
into the Master Prep™ pitcher.
CAUTION: Blades are sharp! Use
extreme caution when handling the
blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance
empty.
1 Place the Master Prep
®
pitcher on a
clean, dry, level surface.
2 Holding the lower blade by the shaft,
place it onto the spindle pin inside the
Master Prep
®
pitcher. (Fig. 1)
3 Carefully insert the upper blade over
the lower blade rotating it until it locks
onto the lower blade. (Fig. 2)
IMPORTANT: Always assemble the
blades inside the container.
1
2
Shaft