Ninja Master Prep

10
Using the Master Prep
®
Bowl
CAUTION: Blades are sharp! Use
extreme caution when handling the
blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance
empty.
1 Place the Master Prep
®
bowl on a clean,
dry, level surface.
2 Holding the lower blade by the shaft,
place it over the spindle pin inside the
Master Prep
®
bowl. (Fig. 1)
3 Carefully insert the upper blade over
the lower blade rotating it until it locks
onto the lower blade. (Fig. 2)
IMPORTANT: Always assemble the
blades inside the container.
WARNING: DO NOT try to place the
blades onto the power head and then
into the Master Prep
®
bowl.
4 Place the food that you want to process
into the Master Prep
®
bowl.
IMPORTANT: The blade assembly for
the Master Prep
®
bowl must always be
in place before ingredients are added.
NOTE: DO NOT add more than 2 cups
dry or 1 cup liquid ingredients as this
will strain the motor and may cause
overflow.
Shaft
2
1