17
6. Press . Control Symbol
appears in Meter Display.
Note: If you decide not to perform
a Control Test, press to
remove Control Symbol.
7. Turn Control bottle upside
down. Squeeze one drop of
Control onto a clean tissue.
Wipe off bottle tip.
8.
Gently squeeze a drop on a
small piece of unused
aluminium foil or clear plastic
wrap. Dispose after use.
9.
With Strip still in Meter, touch
edge of Sample Tip to drop of
Control and allow drop to be
drawn into Strip. Remove Strip
from drop when Meter beeps.
Meter begins countdown.
Note:
If Meter does not beep or begin countdown
soon after placing Sample Tip to Control drop,
discard Strip. Repeat test with new Strip. If
problem persists, see Troubleshooting.
Control
Symbol
TB_OB_GutsENG_H4IAU03.qxd:TT_OB_GutsENG.qxd 10/13/10 12:32 PM Page 17
To Next Page
Loading...
