NIRx NIRSport User Manual
Page 7/18
1.3 Problem Reporting Instructions
You may use the following ways of contacting NIRx for additional support and bug reports:
E-mail: support@nirx.net
Web: www.nirx.net/contact
2 Handling and Maintenance
2.1 Transport and Storage
NIRSport devices are wearable instruments and may be moved by the user between different
investigation sites (i.e., labs, exam rooms, etc.) within the institution of the original installation. The
instrument is furthermore specifically designed to be used in free moving human experiments using
approved carrying solutions.
For storing and for transporting the instrument NIRx recommends dedicated hardcase containers
available from NIRx.
2.2 Safe Performance
The equipment should only be handled and operated by trained personnel. Operators must familiarize
themselves with the latest revision of the user’s manual before using the device.
The NIRSport instrument is intended for continuous operation.
2.3 Cleaning, Sterilization, and Disinfection
The outside of the instrument may be cleaned with a damp cloth. A mild soap or a window cleaner may
be used to aid cleaning; do not use solvents. Allow the instrument to thoroughly dry before use.
The fiber optic probe ends that come in contact with the skin can be cleaned and disinfected by wiping
them after use with isopropyl alcohol 70%.
DO NOT USE ETHANOL OR METHANOL OR ACETONE FOR CLEANING OF THE FIBER-
OPTIC SURFACES. THE FIBERS MUST NOT BE STERILIZED IN AN AUTOCLAVE.
The equipment must not be exposed to fluids or condensation humidity conditions.
During storage or transport, the equipment should be kept at a temperature
between -15°C to +70°C and at a relative humidity of 20% to 80% (non-condensing).
Ambient pressure should be within 700 hPa and 1060 hPa.
To Next Page
Loading...
Need help?
General
