IN-14(IN-8-2) Nixie Tube Clock Instructions http://www.nixieclock.org
Designer: YanZeyuan. China. Email: yanzeyuan@163.com Website: www.nixieclock.org 4/8
Display Mode Switch
1. Display time mode
After powering on the clock or pressing the POWER button in shutdown state, clock
displays in time mode. Clock will display HOUR, MINUTE, SECOND in this mode.
2. Display calendar date mode
Press DATE button to enter calendar date display mode. Clock will display YEAR, MONTH,
DAY. Clock will return to display time mode after three seconds.
3． Display lunar date mode
Press DATE button twice to enter display lunar calendar date mode. Clock will display YEAR,
MONTH, DAY of lunar date. Clock will return to display time mode after three seconds.
4. Display GMT time zone mode
Press DATE button three times to enter display GMT time zone mode. Clock will return to
display time mode after three seconds.
5. Display alarm mode
Press ALARM button to show alarm 1 mode. Press ALARM button again to show alarm 2
mode. Clock will return to display time mode after three seconds.
6. Display cathode poisoning prevention setting mode
Press ALARM button three times to show cathode poisoning prevention setting mode; first
tube will display 3. Clock will return to display time mode after three seconds.
7． Display OFF/ON switch time mode
Press ALARM button four times to show OFF time mode; first tube will display 4. Press
ALARM button five times to show ON time mode; first tube will display 5. Clock will return
to display time mode after three seconds.
8． Display temperature mode
Press TEMPERATURE button to show temperature mode. Clock will return to display time
mode after three seconds.
■ If optional temperature sensor is not connected, clock can not display temperature.
Digital Effects Switch
■ In the display time mode, press the FUNC button repeatedly to toggle between
three different digital effects and standard display.
1. Crossfade
Old digit will be concealed gradually as new digit is gradually displayed. Digits show
fading overlap.
2. Fade in & fade out
Old digital will fade gradually. After old digit fades out, the new digit will gradually
fade in.
3. Flip over
The correct digit will be displayed after a fast scrolling through the digits, one after
another, (slot machine effect) until the correct digit is displayed.
4. Standard
To Next Page
Loading...
