Nixie Clock IN-14 - Set Time; Set Date; Set GMT; Set Alarm

IN-14(IN-8-2) Nixie Tube Clock Instructions http://www.nixieclock.org


Designer: YanZeyuan. China. Email: yanzeyuan@163.com Website: www.nixieclock.org  6/8
button to increase light brightness.
■ There are five levels of lighting adjustment.
Set Time
In display time mode, press SET button to enter set time mode. After entering the set
time mode, SECOND (SS) digits will be blinking, meaning SECONDS are now being set. Press
LEFT or RIGHT button to change between MINUTES (MM) and HOURS (HH) setting.
Press button NUM0 - NUM9 to change the numbers. Press OK to save setting.
Press CANCEL to abort setting and exit.
■ After setting success, clock will beep for a long time, and return to display time
mode.
■ If setting is illogical, clock will beep four short times and abort. Settings will not
be saved and the clock will return to display time mode.
■ When setting time, clock displays in 24H format.
Set Date
In display date mode, press SET button to enter set date mode. After entering set date
mode, DAY (DD) will be blinking, meaning now setting DAY. Press LEFT or RIGHT button to
change setting position between DD - MM - YY.
Press button NUM0 - NUM9 to change the numbers. Press OK to save settings.
Press CANCEL to abort setting and exit.
■ After setting success, clock will beep for a long time, and return to display time
mode.
■ If setting is illogical, clock will beep four short times and abort. Settings will not
be saved and the clock will return to display time mode.
■ The moon date doesn't need setting, the clock will calculate automatically
according to the Gregorian calendar.
■ Two digit of YEAR (YY) means 20YY year.
Set GMT Time Zone
In display GMT mode, press LEFT or RIGHT button to change the GMT time zone.
If the digits are displayed on the left side of the clock, it means GMT-. If the digits are
displayed on the right side of the clock, it means GMT+. For example: BEIJING lies in GMT8+,
press the LEFT or RIGHT button to get digits displayed on the right two tubes to show 08.
Set Alarm
In display alarm 1/2 mode, press SET button enter set alarm mode.
In set alarm mode, HOUR (HH) will blink, meaning now setting HOUR of alarm. Press
LEFT or RIGHT button to change between (HH) and (MM) setting position.
Left two tubes will display which alarm is being set, A1 means now setting alarm 1, A2