IN-14(IN-8-2) Nixie Tube Clock Instructions http://www.nixieclock.org
Designer: YanZeyuan. China. Email: yanzeyuan@163.com Website: www.nixieclock.org 5/8
In standard mode, if digit changes, the new digit is displayed immediately.
■ This option is stored in the clock and is not lost when powered off.
Time Format 12H/24H
In the display time mode, press OK button repeatedly to toggle between time formats.
■ Time format setting for 12H/24H is for the display time mode only. During setup
time mode, time is always set using the 24H format.
■ This option is stored in the clock and is not lost when powered off.
Date Format YY-MM-DD / MM-DD-YY / DD-MM-YY
In the display date mode, press FUNC button repeatedly to toggle between date formats.
■ This option is stored in the clock and is not lost when powered off.
Temperature Units ℃/℉
In the display temperature mode (with the optional temp sensor), press FUNC button to
toggle between ℃/℉ .
■ This option is stored in the clock and is not lost when powered off.
Backlight Mode Switch
In the display time mode, press LIGHT button to turn ON/OFF backlight or set backlight to
breath.
In the display time mode, press NUM0 - NUM9 buttons to turn on the backlight directly,
and set the backlight color.
NUM0: Backlight will change the color according the day of the week as shown below:
Monday: red. Tuesday: orange. Wednesday: yellow. Thursday: green.
Friday: cyan. Saturday: blue. Sunday: purple.
NUM1: red color breath. NUM2: yellow color breath. NUM3: green color breath.
NUM4: cyan color breath. NUM5: blue color breath. NUM6: purple color breath.
NUM7: white color breath. NUM8: auto change color breath.
NUM9: auto change backlight color with backlight always lit.
Beep Tone Mode Switch
In the display time mode, press the CANCEL button to switch the beep sound on or off. If
the last tube display is 1, the beep is on; if the last tube display is 0, the beep is off.
■ Alarm sound is independent of this setting.
Adjust Backlight Brightness
In the display time mode, press LEFT button to reduce light brightness, press RIGHT
To Next Page
Loading...
