Nixie Clock IN-14 - Set Switch On;Off Time; GPS Adjust Date & Time

IN-14(IN-8-2) Nixie Tube Clock Instructions http://www.nixieclock.org


Designer: YanZeyuan. China. Email: yanzeyuan@163.com Website: www.nixieclock.org  7/8
means now setting alarm 2.
Press button NUM0 - NUM9 to change the number.
Press OK to save setting.
Press CANCEL to abort setting and exit.
■ After setting success, clock will beep for a long time, and return to display time
mode.
■ If setting is illogical, clock will beep four short times and abort. Settings will not
be saved and the clock will return to display time mode.
■ To disable the alarm function, press the FUNC button in alarm display mode, then
clock display OFF, means this alarm is disabled.
■ If the clock alarm is sounding, press any button to stop the alarm. The clock will
automatically stop the alarm after 60 seconds.
Set Switch On/Off Display Time
In display time mode, press ALARM button four times to enter set SWITCH OFF TIME
mode and the left tube will display 4. Press ALARM button five times enter set SWITCH ON
TIME mode and the left tube will display 5.
After entering set SWITCH ON/OFF TIME mode, the middle two tubes will blink, meaning
now setting HOUR of SWITCH ON/OFF TIME. Press LEFT or RIGHT button to change setting
position between (HH) and (MM).
Press button NUM0 - NUM9 to change the number.
Press OK to save setting.
Press CANCEL to abort setting and exit.
■ After setting success, clock will beep for a long time, and return to display time
mode.
■ If setting is illogical, clock will beep four short times and abort. Settings will not
be saved and the clock will return to display time mode.
■ If the clock is in SWITCH OFF TIME mode, the tube, colon and LED backlight will
turn off automatically.
■ During the SWITCH OFF TIME mode, you can set the time or date, check date,
alarm setting, temperature, and GMT setting normally.
■ During the SWITCH OFF TIME mode, to display the current time, please press the
POWER button and the clock will display for 5 seconds and then switch off.
■ During the SWITCH OFF TIME mode, ALARM will work normally. Clock will
display while sounding alarm and switch off automatically after the alarm reset.
■ During the SWITCH OFF TIME mode, if the clock is in GPS adjusting mode, the
clock will display time normally and switch off automatically after adjustment is
finished.
GPS Adjust Date & Time
When the optional GPS receiver is connected, the clock will update the time and date from
the GPS satellite after the GPS receiver gets real time from the satellite. After a successful sync,