16
3.4.2 Shutdown with the Tracer external battery
To turn the LF10 camera off, simply disconnect the
battery connector from the LF10 camera.
1. Hold the battery cable connector by the lock ring
and pull it outwards. The lock ring will slide until it
releases the connection. Alternatively, disconnect
the cable from the battery.
2. The shutdown logo will appear, and the system
will safely and reliably shut down.
3. The camera’s red power LED will turn off once
shutdown has completed.
If you encounter a problem with the system, disconnect
the battery power and wait until the power LED turns
off. If shutdown takes more than 5 to 10 minutes aer
disconnecting the battery, contact NL Acoustics for service.
3.4 Shutdown
To shut the camera down, please see the sections below that provide instructions for turning the camera off using either
the RRC2040 battery or Tracer battery.
3.3 Device setup wizard
The first time the LF10 is powered up, the device setup
wizard will appear. The wizard will help you set up the
settings needed for using the device, such as the WiFi
settings (not supported in all regions), language, location,
and time zone. This information can be changed later via
the settings menu. Please see Section 4.7: Settings for
more details.
3.3.1 Device registration
Create an account and register your device on the
NLCloud service. Use the NL Cloud to store and view
the uploaded snapshots and videos, among other
functionalities (Section 7: NL Cloud). Please follow the on-
screen instructions given by the setup wizard in order to
register the device. You can also register the device later
in the network settings (Section 4.7.1: Network settings).
- NOTE: Do not pull the device by the cable or use any kind of pliers or tools to disconnect cables! -
3.4.1 Shutdown with RRC2040 battery
To turn off the LF10 camera, simply press the ON/OFF
button. When turned OFF, the button is in the up position.
1. Press down the ON/OFF button until it clicks and
rises up. The power is now switched off.
Alternatively, you can withdraw the battery from the
battery housing.
2. The shutdown logo will appear, and the system
will safely and reliably shut down.
3. The camera’s red power LED will turn off once
shutdown has completed.
If you encounter a problem with the system, you can
perform a hard shutdown by disconnecting the battery
power and waiting until the camera’s power LED turns
off. If shutdown takes more than 5 to 10 minutes aer
disconnecting the battery, contact NL Acoustics for service.
To Next Page
Loading...