NOCO Genius GENIUSPRO50 User Manual

GENIUSPRO50
User Guide & Warranty
DANGER
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT.
Failure to follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION,
FIRE, which may result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE.
Electrical Shock. Product is an electrical device that can shock and cause serious injury. Do not
cut power cords. Do not submerge in water or get wet.
Explosion. Unmonitored, incompatible, or damaged batteries can explode if used with product. Do
not leave product unattended while in use. Do not attempt to charge a damaged or frozen battery.
Use product only with batteries of recommended voltage. Operate product in well ventilated areas.
Fire. Product is an electrical device that emits heat and is capable of causing burns. Do not cover
product. Do not smoke or use any source of electrical spark or fire when operating product. Keep
product away from combustible materials.
Eye Injury. Wear eye protection when operating product. Batteries can explode and cause flying
debris. Battery acid can cause eye and skin irritation. In the case of contamination of eyes or skin,
flush aected area with running clean water and contact poison control immediately.
Explosive Gases. Working in the vicinity of a lead-acid is dangerous. Batteries generate explosive
gases during normal battery operation. To reduce risk of battery explosion, follow all safety
information instructions and those published by the battery manufacturer and manufacturer of
any equipment intended to be used in the vicinity of battery. Review cautionary markings on these
products and on engine.
For more information
and support visit:

NOCO Genius GENIUSPRO50 Specifications

General

Model	GENIUSPRO50
Type	Battery Charger
Output Voltage	12V, 24V
Output Current	50A
Battery Voltage	12V, 24V
Display	LCD
Input Voltage	100-240V AC
Battery Types Supported	Lithium
Charging Modes	Lithium, AGM
Protection Features	Reverse Polarity, Overcharge, Short circuit

Summary

General Safety Warnings

Electrical Shock Hazard

Warns about electrical shock hazards from the product and advises against cutting cords or submerging in water.

Explosion Hazard

Details risks of battery explosion, unattended use, and charging damaged batteries.

Fire Hazard

Highlights burn risks and fire hazards, advising against covering product or using sparks.

Eye Injury Hazard

Emphasizes wearing eye protection due to battery explosion risks and acid irritation.

Explosive Gases Hazard

Addresses risks of explosive gases from lead-acid batteries and proper precautions.

Important Safety Instructions

Getting Started and Mounting

Guidance on initial setup, including battery voltage/chemistry checks and product mounting considerations.

Personal Safety Precautions

Advises on protective gear, clean water, avoiding metal objects, and handling procedures.

Product Handling and Storage

Covers care, avoiding damage, dry storage, and operating temperature limits for the product.

Proposition 65 Warning

States California Proposition 65 warning regarding lead exposure from batteries and accessories.

Compatibility and Medical Device Interaction

Details battery compatibility, potential electromagnetic interference with medical devices, and physician consultation.

Cleaning and Environmental Precautions

Instructions for cleaning, avoiding explosive atmospheres, and disclaimers for high-consequence activities.

Radio Frequency Interference

Explains FCC compliance and potential interference issues with other electronic equipment.

How To Use

Charging Modes Overview

Introduces the 17 charging modes and the importance of selecting the correct one.

Detailed Charging Modes (1)

Explains Standby, 12V, 12V AGM, 12V Lithium, 6V, 6V AGM, 6V Lithium, and 24V modes.

Detailed Charging Modes (2)

Details 24V AGM, 24V Lithium, Force Mode, 12V/24V Supply, Repair, and 10A Mode.

Specific Mode Explanations

Provides detailed usage instructions for Lithium, Supply, and Repair modes.

Force Mode and Reduced Current

Explains Force Mode for low voltage detection and Reduced Charge Current Mode.

Connecting to the Battery

Step-by-step guide for connecting the charger to the battery terminals.

Begin Charging Process

Guides on verifying connections and initiating the charging process.

Understanding Charge LEDs

Explains the meaning of different LED indicators during the charging process.

Understanding Error and Charging Information

Error LED Indicators

Details LED indications for common error conditions and their solutions.

Approximate Charging Times

Provides estimated charging times based on battery size and voltage.

Product Overview and Specifications

Product Diagram and Controls

Illustrates the product layout, labeling key buttons and indicators.

LED Functions Explained

Detailed explanation of each LED indicator's function and meaning.

Technical Specifications

Lists key technical details including voltage, current, capacity, and dimensions.

Warranty Information

3 Year Hassle-Free Warranty

Details the warranty period, coverage, and limitations for product defects.

Warranty Claim Procedure

Outlines the steps required to initiate and process a warranty claim.

Warranty Exclusions

Lists conditions and actions that will void the product warranty.

Hassle-Free Warranty Conditions

Explains warranty terms based on proof of purchase and registration.