Nokia 30 - Command Templates; Command List

11/18
7. COMMAND TEMPLATES
7.1 COMMAND LIST
The Nokia 30 GSM Connectivity Terminal supports the following text message templates as
commands and they are not case sensitive (see Table 2).
Table 2 Nokia 30 GSM Connectivity Terminal User control mode command list
Command Description
Change_Pword
Change password
Input_Get All
Return states of all inputs
Input_Get 1
Return a state of input 1
Input_Get 2
Return a state of input 2
Input_Get 3
Return a state of input 3
Input_Get_Change All
Subscribe a input state change of all inputs
Input_Get_Change 1
Subscribe a state change of input 1
Input_Get_Change 2
Subscribe a state change of input 2
Input_Get_Change 3
Subscribe a state change of input 3
Output_Get All
Return a state of all outputs
Output_Get 1
Return a state of output 1.
Output_Get 2
Return a state of output 2
Output_Get 3
Return a state of output 3
Output_Get 4
Return a state of output 4
Output_Get 5
Return a state of output 5
Output_Set 1 On
Set output 1 ON
Output_Set 1 Off
Set output 1 OFF
Output_Set 2 On
Set output 2 ON
Output_Set 2 Off
Set output 2 OFF
Output_Set 3 On
Set output 3 ON
Output_Set 3 Off
Set output 3 OFF
Output_Set 4 On
Set output 4 ON
Output_Set 4 Off
Set output 4 OFF
Output_Set 5 On
Set output 5 ON
Output_Set 5 Off
Set output 5 OFF