Nokia 30 - Page 19

17/18
Table 7 Output_Set X commands
Command type Command template Comments
Output_Set Z On
, Z = 1,2,3,4 or 5
Nokia30 Output_Set Z On
Response e.g. when Z = 1:
OUTPUT_SET Z ON:
OUTPUT 1: ON
OUTPUT 2: X
OUTPUT 3: X
OUTPUT 4: X
OUTPUT 5: X, The X refers to either ON or OFF.
The command sets
output Z (Z = 1,2,3,4 or
5) to ON state and the
response returns the
state of all outputs
Output_Set Z Off
, Z = 1,2,3,4 or 5
Nokia30 Output_Set Z Off
Response e.g. when Z = 1:
OUTPUT_SET 1 OFF:
OUTPUT 1: OFF
OUTPUT 2: X
OUTPUT 3: X
OUTPUT 4: X
OUTPUT 5: X, The X refers to either ON or OFF.
The command sets
output Z (Z = 1,2,3,4 or
5) to OFF state and the
response returns the
state of all outputs
Output_Set All On
Nokia30 Output_Set All On
Response:
OUTPUT_SET ALL ON:
OUTPUT 1: ON
OUTPUT 2: ON
OUTPUT 3: ON
OUTPUT 4: ON
OUTPUT 5: ON
The command sets all
outputs to ON state and
the response returns
the state of all outputs
Output_Set All Off
Nokia30 Output_Set All Off
Response:
OUTPUT_SET ALL OFF:
OUTPUT 1: OFF
OUTPUT 2: OFF
OUTPUT 3: OFF
OUTPUT 4: OFF
OUTPUT 5: OFF
The command sets all
outputs to OFF state
and the response
returns the state of all
outputs