108Copyright © 2005 Nokia. All rights reserved.
Caller groups
You can arrange the names and phone numbers saved in Contacts into caller
groups. For each caller group, you can set the phone to sound a specific ringing
tone and show a selected graphic on the display when the phone recognises a call
from a phone number in the group, see below. To set the phone to ring only upon
calls from phone numbers belonging to a selected caller group, see Alert for in
Tone settings on page 110.
Press Menu and select Contacts and Caller groups and select the desired caller
group. Select
• Group name, key in a new name for the caller group and press OK.
• Group ringing tone and select the ringing tone for the group. Default is the
ringing tone selected for the currently active profile.
• Group logo and select On to set the phone to display the group logo, Off not to
display it, or View to view the logo.
• Group members to add a name to the caller group, press Add. Scroll to the
name you want to add to the group and press Add.
To remove a name from a caller group, scroll to the name that you want to
remove, and press Options and select Remove contact.
To Next Page
Loading...
