29Copyright © 2005 Nokia. All rights reserved.
■ Changing the grips
1. Remove the covers from the phone. See
Changing the covers on page 27.
2. To remove the grips slide them to the
top of the phone (1), then remove the
grip (2).
3. Replace the grips as shown.
4. Replace the covers of the phone. See
Changing the covers on page 27.
■ Creating cut-out covers
Use the plastic stencil to create a cut-out cover using your own design.
Note: Use normal, plain paper as found in standard printers or use a
photo print that is not thicker than 0.3 mm. To avoid affecting the
antenna performance the material must not contain metal particles.
To Next Page
Loading...
