124Copyright © 2006 Nokia. All rights reserved.
Settings for push to talk
For push to talk service settings, contact your network operator or service provider. You may receive the
settings over the air in a configuration message.
To view and change push to talk settings, select Menu > Connect. > PTT > Options > Settings.
User settings
Incoming PTT calls — To see a notification of incoming calls, select Notify. To answer PTT calls automatically,
select Auto-accept. If you do not want to receive PTT calls, select Not allowed.
PTT call alert tone — Select the tone for incoming push to talk calls. If you want the incoming call alert setting
for push to talk to follow your profile settings, select Set by profile. For example, if your profile is silent,
push to talk is set to do not disturb (DND) and, except for callback requests, you are not available to others
using push to talk.
Callback request tone — Select a tone for callback requests.
Application start-up — To start push to talk automatically, select Always automatic. To start push to talk
automatically only while in your home network, select Auto. in home network.
Default nickname — Enter your nickname shown to other users. Your service provider may have disabled the
editing of this option in your phone.
Show my PTT address — Select Never if you want to hide your push to talk address from others in push to talk
channels and one-to-one calls.
Show my login status — Select Yes if you want your status to be shown or No if you want your status to be
hidden.
Connection settings
Domain — Enter the domain name obtained from your service provider.
Access point name — Enter the push to talk access point name. The access point name is needed to establish a
connection to the GSM/GPRS network.
To Next Page
Loading...
