125Copyright © 2006 Nokia. All rights reserved.
Server address — Enter the IP address or domain name of the push to talk server obtained from your service
provider.
User name — Enter your user name obtained from your service provider.
PTT password — Enter your password used to enter the push to talk service.
Log in to push to talk
Select Menu > Connect. > PTT. Push to talk automatically logs in to the service when started.
When log in is successful, push to talk automatically connects to channels that were active when the
application was last closed. If the connection is lost, the device automatically tries to log back in until you exit
push to talk.
indicates a push to talk connection.
indicates that push to talk is set to do not disturb (DND).
Exit push to talk
Select Menu > Connect. > PTT > Options > Exit. Switch push to talk off after exiting application? is displayed.
Select Yes to log out and close the service. If you want to keep the application active in the background, select
No.
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be
extremely loud.
1. Select Menu > Connect. > PTT > Options > PTT contacts, scroll to the contact you want to talk to, and
select Options > Talk 1 to 1.
To Next Page
Loading...
