Call functions
22
Copyright © 2006 Nokia. All rights reserved.
Call waiting
To answer the waiting call during
an active call, press the call key.
The first call is put on hold. To end
the active call, press the end key.
To activate the Call waiting
function, see “Call,” p. 53.
■ Options during a call
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may
be extremely loud.
Many of the options that you can
use during a call are network
services. For availability, contact
your network operator or service
provider.
During a call, select Options and
from the following options:
Call options are Mute or Unmute,
Contacts, Menu, Auto volume on
or Auto volume off, Record, Lock
keypad, Loudspeaker, or Handset.
Network services options are
Answer and Reject, Hold or
Unhold, New call, Add to
conference, End call, End all calls,
and the following:
Send DTMF — to send tone strings
Swap — to switch between the
active call and the call on hold
Transfer — to connect a call on
hold to an active call and
disconnect yourself
Conference — to make a
conference call that allows up to
five persons to take part in a
conference call
Private call — to discuss privately
in a conference call
To Next Page
Loading...
