Push to talk
Copyright © 2006 Nokia. All rights reserved.
79
Receive an invitation
1. When you receive a text
message invitation to a
channel, Channel invitation
received: is displayed.
2. To view the nickname of the
person who sent the invitation
and the channel address if the
channel is not a private
channel, select View.
3. To add the channel to your
phone, select Save. To set the
status for the channel, select
Default, Listened, or Inactive.
To reject the invitation, select
Exit > Yes, or select View >
Discard > Yes.
■ PTT settings
There are two kinds of PTT
settings: settings for connecting
to the service and settings for use.
You may receive the settings for
connecting to the service from
your service provider. See
“Configuration settings service,”
p. 12. You can enter the settings
manually. See “Configuration,”
p. 57.
To select the settings for
connecting to the service, select
Menu > Push to talk > Config.
settings and from the following
options:
Configuration — to select a
service provider, Default, or
Personal config. for PTT service.
Only the configurations that
support the PTT service are shown.
Account — to select a PTT service
account contained in the active
configuration settings
You can also select from the
following options: PTT user name,
Default nickname, PTT password,
Domain, and Server address
To edit the PTT settings for use,
select Menu > Push to talk > PTT
settings and from the following:
1 to 1 calls > On — to select the
phone to allow the reception of
incoming one-to-one calls
1 to 1 calls > Off — to make but
not receive one-to-one calls. The
service provider may offer some
services that override these
settings. To set the phone to first
notify you of incoming one-to-one
calls with a ringing tone, select
Notify.
Listened channels > On — to
activate the listened channels
PTT status in startup > Yes — to
set the phone to automatically
connect to the PTT service when
you switch the phone on
To Next Page
Loading...
