Settings
Copyright © 2006 Nokia. All rights reserved.
55
Operator selection > Automatic
— to set the phone automatically
to select one of the cellular
networks available in your area.
With Manual, you can select a
network that has a roaming
agreement with your home
network operator.
Confirm SIM service actions —
See “SIM services,” p. 89.
Help text activation — to select
whether the phone shows help
texts
Start-up tone — to select whether
the phone plays a start-up tone
when the phone is switched on
■ Connectivity
You can connect your phone to
compatible devices using an
infrared connection. You can also
define the settings for packet data
dial-up connections.
Infrared
You can send or receive data to or
from a compatible phone or data
device (for example, a computer)
through the infrared (IR) port of
your phone. To use an IR
connection, the device with which
you want to establish a
connection must be IrDA
compliant.
Do not point the IR (infrared) beam
at anyone's eyes or allow it to
interfere with other IR devices.
Infrared devices are Class 1 laser
products.
When sending or receiving data,
ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
To activate the IR port of your
phone to receive data using IR,
select Menu > Settings >
Connectivity > Infrared.
To deactivate the IR connection,
select Menu > Settings >
Connectivity > Infrared. When the
phone displays Deactivate
infrared?, select Yes.
If data transfer is not started
within 2 minutes after the
activation of the IR port, the
connection is canceled and must
be started again.
IR connection indicator
When is shown continuously,
the IR connection is activated, and
your phone is ready to send or
receive data through its IR port.
When blinks, your phone is
trying to connect to the other
device, or a connection has been
lost.
To Next Page
