EasyManua.ls Logo

Nokia 6080 - 15 Push to Talk; Push to Talk Menu

Nokia 6080
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Push to talk
Copyright © 2006 Nokia. All rights reserved.
73
15. Push to talk
Push to talk (PTT) over cellular is a
two-way radio service available
over a GSM/GPRS cellular network
(network service). PTT provides
direct voice communication. To
connect, press and hold the
volume up (PTT) key.
You can use PTT to have a
conversation with one person or
with a group of people having
compatible devices. When your
call is connected, the person or
group you are calling does not
have to answer the phone. The
participants should confirm the
reception of any communications
where appropriate, as there is no
other confirmation whether the
recipients have heard the call.
To check availability and costs,
and to subscribe to the service,
contact your service provider.
Roaming services may be more
limited than for normal calls.
Before you can use the PTT service,
you must define the required PTT
service settings. See “PTT settings,”
p. 79.
While you are connected to the
PTT service, you can use the other
functions of the phone. The PTT
over cellular service is not
connected to traditional voice
communication, and therefore
many of the services available for
traditional voice calls (for
example, voice mailbox) are not
available for PTT over cellular
communications.
Push to talk menu
Select Menu > Push to talk.
To connect to or disconnect from
the PTT service, select Switch PTT
on or Switch PTT off.
To view the received callback
requests, select Callback inbox.
To view the list of PTT channels,
select Channel list.
To view the list of contacts to
which you have added the PTT
address received from the service
provider, select Contacts list.
To add a new PTT channel to the
phone, select Add channel.
To set the PTT settings for use,
select PTT settings.
To set the required settings for the
PTT connection, select Config.
settings.

Table of Contents

Related product manuals