Nokia 6080 - Security

Settings
58 Copyright © 2006 Nokia. All rights reserved.
bearer, and packet data access
point or GSM dial-up number.
Connect to service provider
support — to download the
configuration settings from your
service provider
Personal configuration settings —
to add new personal accounts for
various services manually, and to
activate or delete them. To add a
new personal account if you have
not added any, select Add new;
otherwise, select Options > Add
new. Select the service type, and
select and enter each of the
required parameters. The
parameters differ according to the
selected service type. To delete or
activate a personal account, scroll
to it, and select Options > Delete
or Activate.
■ Security
When security features that
restrict calls are in use (such as
call barring, closed user group and
fixed dialing) calls still may be
possible to the official emergency
number programmed into your
device.
Select Menu > Settings >
Security and from the following
options:
PIN code request — to set the
phone to ask for your PIN or UPIN
code every time the phone is
switched on. Some SIM cards do
not allow the code request to be
turned off.
Call barring service (network
service) — to restrict incoming
calls to and outgoing calls from
your phone. A barring password is
required.
Fixed dialling — to restrict your
outgoing calls to selected phone
numbers if this function is
supported by your SIM card
Closed user group (network
service) — to specify a group of
people whom you can call and
who can call you
Security level > Phone — the
phone asks for the security code
whenever a new SIM card is
inserted into the phone. Select
Memory, and the phone asks for
the security code when SIM card
memory is selected and you want
to change the memory in use.
Access codes — to change the
security code, PIN code, UPIN
code, PIN2 code, and barring
password
Code in use — to select whether
the PIN code or UPIN code is active
Pin2 code request — to select
whether the PIN2 code is required