7368 ISAM ONT E-240G-B Product Guide ETSI ONU safety guidelines
Issue: 01 3FE-46261-AAAA-TCZZA 25
Figure 4 PSE certification
3.2 Safety standards compliance
This section describes the ONU compliance with the European safety standards.
3.2.1 EMC, EMI, and ESD compliance
The ONU equipment complies with the following EMC, EMI, and ESD requirements:
• EN 300-386 V1.6.1: Electromagnetic Compatibility and Radio Spectrum Matters
(ERM): Telecommunications Network Equipment; Electromagnetic Compatibility
(EMC) requirements; Electrostatic Discharge (ESD) requirements
• EN 55022 (2006): Class B, Information Technology Equipment, Radio
Disturbance Characteristics, limits and methods of measurement
• EN 55024 (2010): Information Technology Equipment, Immunity Characteristics,
limits and methods of measurement
• European Council Directive 2004/108/EC
• EN 300-386 V1.6.1: 2012
• EN 55022:2006 Class B (ONUs)
3.2.2 Equipment safety standard compliance
The ONU equipment complies with the requirements of EN 60950-1, Safety of
Information Technology Equipment for use in a restricted location (per R-269).
This is a Class B product based on the standard of the Voluntary Control Council for Interference
from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in
a domestic environment, it may cause radio interference. Install and use the equipment according
to the instruction manual.
Warning
19841
Release 06.01.01 | June 2019 | Edition 09
To Next Page
Loading...
