Install an E-240G-B ONU
58
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
•
wire strippers
• fiber optic splicing tools
• RJ-45 cable plug crimp tool
• voltmeter or multimeter
• optical power meter
• drill and drill bits
• pin-in-hex screwdriver
6.5 Safety information
Read the following safety information before installing the ONU.
Danger 1 — Hazardous electrical voltages and currents can
cause serious physical harm or death. Always use insulated
tools and follow proper safety precautions when connecting or
disconnecting power circuits.
Danger 2 — Make sure all sources of power are turned off and
have no live voltages present on feed lines or terminals. Use a
voltmeter to measure for voltage before proceeding.
Danger 3 — Always contact the local utility company before
connecting the enclosure to the utilities.
Warning — This equipment is ESD sensitive. Proper ESD
protections should be used when removing the fiber access
cover of the ONU.
Caution — Keep indoor ONUs out of direct sunlight. Prolonged
exposure to direct sunlight can damage the ONU.
Release 06.01.01 | June 2019 | Edition 09
To Next Page
Loading...
