Configure an E-240W-A indoor ONT
82
7368 ISAM ONT E-240W-A Product Guide
3FE-46974-AAAA-TCZZA Issue: 01
Procedure 16 LAN IPv6 networking configuration
1 Select Network > LAN_IPv6 from the top-level menu in the EPON Home Gateway window,
as shown in Figure 32.
Figure 32 LAN IPv6 network window
Table 19 describes the fields in the LAN IPv6 network window.
Table 19 LAN IPv6 network parameters
Field Description
DNS Server Choose a DNS server from the drop-down menu.
prefix config Choose a prefix config option from the drop-down menu, either
WANConnection (prefix will be obtained from the WAN) or Static (enables you
to enter the prefix).
prefix This field appears if you selected the “Static” option for the “prefix config” field.
Type a connection.
Interface This field appears if you selected the Wan Connection option for the “prefix
config” field. Choose a WAN connection interface from the drop-down menu.
DHCP Start IP Address Enter the starting DHCP IP address.
(1 of 2)
Release 06.00.00h | January 2019 | Edition 08
To Next Page
Loading...
