Configure an E-240W-A indoor ONT
84
7368 ISAM ONT E-240W-A Product Guide
3FE-46974-AAAA-TCZZA Issue: 01
Procedure 17 WAN networking configuration
1 Select Network > WAN from the top-level menu in the EPON Home Gateway window, as
shown in Figure 33.
Figure 33 WAN network window
Table 20 describes the fields in the WAN network window.
Table 20 WAN network parameters
Field Description
WAN Connection List Choose a WAN connection from the drop-down menu to set the
connection parameters
IP Mode Choose an IP mode from the drop-down menu: IPv4 or IPv6
Enable/Disable Select this checkbox to enable the WAN connection
NAT Select this checkbox to enable NAT
Service Select the checkboxes to enable the following service types for this
connection:
• TR-069
• INTERNET
• IPTV
WAN IP Mode Choose an IP mode from the drop-down menu
(1 of 2)
Release 06.00.00h | January 2019 | Edition 08