3. Enter the recipient’s e-mail address, write the subject,
and enter the e-mail message. To attach a file, select
the Insert button and from the options.
To save the e-mail, select Options > Save message.
To edit or continue writing your e-mail later, select As
draft message.
4. To send the e-mail message, select the Send button.
To send an e-mail from the draft folder, select Menu >
Messaging > Drafts and the desired message.
Read an e-mail and reply
Important: Exercise caution when opening
messages. E-mail messages or multimedia message
objects may contain malicious software or otherwise be
harmful to your device or PC.
To download e-mail messages that have been sent to your
e-mail account, select Menu > Messaging and your e-
mail account. Confirm to connect to your e-mailbox. The
e-mail application only downloads e-mail headers at first.
Select an e-mail and press Open to download the
complete e-mail message. Scroll down to view the e-mail.
Select Retrieve to download attachments. Select
Options > Reply to reply to an e-mail. Confirm or edit
the e-mail address and subject and create your reply
message. To send the reply message, select the Send
button. To terminate the connection to your e-mailbox
select Options > Disconnect. The connection to the e-
mailbox is also automatically terminated after some time
without activity.
New e-mail notifications
Your device can automatically check your e-mail account
in time intervals and issue a notification, if your e-mail
account has received new e-mail .
1. Select Menu > Messaging > Message settings >
E-mail messages > Edit mailboxes.
2. Select your e-mail account, Downloading sett. and
the following options:
● Mailbox upd. interval — to set how often your
device checks your e-mail account for new e-mail
● Automatic retrieval — to retrieve new e-mail
automatically from your e-mail account.
3. To enable the new e-mail notification, select Menu >
Messaging > Message settings > E-mail
messages > New e-mail notif. > On.
Flash messages
Flash messages are text messages that are instantly
displayed upon reception. Flash messages are not
automatically saved.
Write a flash message
Select Menu > Messaging > Create message > Flash
message. Enter the recipient’s phone number and write
your message. The maximum length of a flash message is
70 characters. To insert a blinking text into the message,
select Options > Insert symbol > Blink character to
set a marker. The text after the marker blinks. To end the
blinking text range, insert a second marker.
Cyan
Magenta
Yellow
Black
25
To Next Page
Loading...
