Make a channel call
To make a call to a channel, select Channel list in the PTT
menu, scroll to the desired channel, and press and hold
the PTT (volume up) key.
Make a one-to-one call
To start a one-to-one call, select Menu > Contacts >
Names, or Menu > Push to talk > Callback inbox,
Channel list, or Contacts list. Select a contact, a member,
or a nickname, and press and hold the PTT (volume up)
key.
Make a PTT call to multiple
recipients
You can select multiple PTT contacts from the contact list.
1. Select Menu > Push to talk > Contacts list, and
mark the desired contacts.
2. Press and hold the PTT (volume up) key to start the call.
The participating contacts are shown on the display as
soon as they join the call.
3. Press and hold the PTT (volume up) key to talk to them.
Release the PTT (volume up) key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call, which
you can accept or reject.
When you press and hold the PTT (volume up) key while
the caller is talking, you hear a queuing tone, and
Queuing is displayed. Wait for the other person to finish;
then you can talk immediately.
Callback requests
Send a callback request
If you make a one-to-one call and do not get a response,
you can send a callback request from following lists:
● Menu > Contacts > Names
● Menu > Push to talk > Callback inbox, Channel
list, or Contacts list
Select a contact, a member, or a nickname and Options >
Send PTT callback.
Respond to a callback request
When someone sends you a callback request, Callback
request received is displayed in the standby mode. To
open the Callback inbox, select View. The list of
nicknames of the persons who have sent you callback
requests is shown. To make a one-to-one call, select the
desired request, and press and hold the PTT (volume up)
key.
Add a one-to-one contact
You can save the names of persons to whom you often
make one-to-one calls in the following ways:
Cyan
Magenta
Yellow
Black
51
To Next Page
Loading...
