bearer, and packet data ac
cess point or GSM dial-up
number.
● Connect to support
— to download the configuration
settings from your service provider
Security
When security features that re
strict calls are in use (such
as call barring, closed user gr
oup, and fixed
dialing), calls
may be possible to the official emergency number
programmed into your device.
Select
Menu >
Settings >
Security and from the
following options:
● PIN code request
and UPIN code request
— to set
the device to ask for your PIN or UPIN code every time
the device is switched on. Some SIM cards do not allow
the code request to be turned off.
● PIN2 code request
— to select whether the PIN2 code
is required when using a specific device feature which
is protected by the PIN2 code. Some SIM cards do not
allow the code request to be turned off.
● Call barring service — to restrict incoming calls to and
outgoing calls from your device (network service).
A
barring password is required.
● Fixed dialling
— to restrict your outgoing calls to
selected phone numbers if this function
is supported
by your SIM card. When th
e fixed dialing is on, GPRS
connections are not possible
except while sending text
messages over a GPRS connec
tion. In this case, the
recipient’s phone number
and the message center
number must be included in the fixed dialing list.
●
Closed user group
— to specify a group of people
whom you can call and wh
o can call you (network
service)
● Security level
— Select
Phone
to set the device to ask
for the security code wh
enever a new SIM card is
inserted into the de
vice. If you select
Memory
, the
device asks for the security code when the SIM card
memory is selected, and
you want to change the
memory in use.
● Access codes
— to change the security code, PIN code,
UPIN code, PIN2 code, or barring password
● Code in use
— to select whether the PIN code or UPIN
code should be active
●
Authority certificates or User certificates
— to view
the list of the authority or
user certificates downloaded
into your device. See "Certificates," p. 60.
● Security module sett.
— to view
Secur. module
details, activate Module PIN request
, or change the
module PIN and signing PIN. See "Access
codes," p. 10.
Cyan
Magenta
Yellow
Black
Personal config. sett.
— to manually add new
personal accounts for variou
s services and to activate
or delete them. To add a new personal account if you
have not added
any, select
Add; otherwise, select
Options >
Add new. Select the service type, and
select and enter each of the required parameters. The
parameters differ according
to the selected service
type. To delete or activate a personal account, scroll
to
it, and select Options
> Delete
or Activate.
●
42
To Next Page
Loading...
