use Nokia approved enhancements for this model. Check
with the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth
and from the following options:
● Bluetooth — Select On to activate the Bluetooth
function.
indicates that Bluetooth is activated.
● My phone's visibility — to define how your device is
shown to other Bluetooth devices
● Search audio enhanc. — to search for compatible
Bluetooth audio devices. Select the device that you
want to connect to the phone.
● Active devices — to check which Bluetooth
connection is currently active
● Paired devices — to search for any Bluetooth device
in range. Select New to list any Bluetooth device in
range. Select a device and Pair. Enter an agreed
Bluetooth passcode of the device (up to 16 characters)
to pair the device to your device. You must only give
this passcode when you connect to the device for the
first time. Your device connects to the other device, and
you can start data transfer.
● My phone's name — to set the device name for
Bluetooth connections
If you are concerned about security, turn off the Bluetooth
function, or set My phone's visibility to Hidden. Always
accept only Bluetooth communication from others whom
you trust.
Packet data
General packet radio service (GPRS) is a network service
that allows mobile devices to send and receive data over
an internet protocol (IP)-based network.
To define how to use the service, select Menu >
Settings > Connectivity > Packet data > Packet data
conn. and from the following options:
● When needed — to set the packet data connection to
established when an application needs it. The
connection will be closed when the application is
terminated.
● Always online — to set the device to automatically
connect to a packet data network when you switch the
device on.
You can connect the device using Bluetooth wireless
technology or USB data cable connection to a compatible
PC and use the device as a modem to enable GPRS
connectivity from the PC.
To define the settings for connections from your PC, select
Menu > Settings > Connectivity > Packet data >
Packet data settings > Active access point, and
activate the access point you want to use. Select Edit
active access pt. > Alias for access point, enter a name
to change the access point settings, and select OK. Select
Packet data acc. pt., enter the access point name (APN)
to establish a connection to a network, and select OK.
Establish an internet connection by using your phone as
a modem. See "Nokia PC Suite," p. 61. If you have set the
Cyan
Magenta
Yellow
Black
38
To Next Page
Loading...
