● Security keyguard — To set the device to ask for the
● Automatic keyguard
— to lock the keypad
automatically after a preset time delay when the device
is in the standby mode and
no function of the device
has been used. Select
On, and set the time.
● Welcome note
— to write the note that is shown
when the device is switched on
● Flight query
— The device asks every time when it is
switched on whether you want
to use the flight profile.
With the flight profile, all radio connections are
switched off. The flight profil
e should be used in areas
sensitive to radio emissions.
Enhancements
This menu or the following op
tions are shown
only if the
device is or has been connected to a compatible mobile
enhancement.
Select
Menu >
Settings
> Enhancements. Select an
enhancement, and depending
on the enhancement, from
the following options:
● Default profile
— to select the profile that you want
to be automatically activated when you connect to the
selected enhancement
●
Automatic answer
— to set the device to answer an
incoming call automatically after 5 seconds. If
Incoming call alert: is set to
Beep once
or Off
,
automatic answer is off.
●
Lights
— to set the lights permanently
On. Select
Automatic
to set the lights on for 15 seconds after a
keypress.
●
Text phone
— Select Use text phone >
Yes
to use
this setting instead of headset or loopset settings.
Configuration
You can configure your device with settings that are
required for certain services. Your service provider may
also send you these settings. See "Configuration setting
service," p. 10.
Select
Menu >
Settings >
Configuration
and from the
following options:
●
Default config. sett.
— to view the service providers
saved in the device. To set the configuration settings
of the service provider as default settings, select
Options
> Set as default
.
●
Activ. def. in all apps.
— to activate the default
configuration settings for supported applications
●
Preferred access pt.
— to view the saved access
points. Scroll to an access point, and select
Options >
Details
to view the name of the service provider, data
Cyan
Magenta
Yellow
Black
security code when you unlo
ck the keyguard.
Select On
,
and select security code
.
Operator selection
— Select
Automatic
to set the
device to automatically se
lect one of the cellular
networks available in your area. With
Manual you can
select a network that has a roaming agreement with
●
Confirm SIM actions
— See "SIM services," p. 61.
Help text activation
— to select whether the device
Start-up tone
— The device plays a tone when it is
switched on.
●
●
●
your serv
ice provider.
The availability depends on your service provider.
shows help texts
41
To Next Page
Loading...
