USB data cable
You can use the USB data cable to transfer data between
the device and a compatible PC or a printer supporting
PictBridge. You can also use the USB data cable with Nokia
PC Suite.
To activate the device for data transfer or image printing,
connect the data cable. Confirm "USB data cable
connected. Select mode." and select from the following
options:
● Nokia mode — to use the cable for PC Suite
● Printing & media — to use the device with a
PictBridge compatible printer or with your compatible
PC
● Data storage — to connect to a PC that does not have
Nokia software and use the device as a data storage
device
To change the USB mode, select Menu > Settings >
Connectivity > USB data cable and the desired USB
mode.
Call
Select Menu > Settings > Call and from the following
options:
● Call divert — to divert your incoming calls (network
service). You may not be able to divert your calls if some
call barring functions are active. See
"Security," p. 42.
● Voice clarity — Select Active to enhance speech
intelligibility especially in noisy environments.
● Anykey answer — Select On to answer an incoming
call by briefly pressing any key, except the power key,
the left and right selection keys, or the end key.
● Automatic redial — Select On to make a maximum
of 10 attempts to connect the call after an unsuccessful
call attempt.
● Speed dialling — Select On to dial the names and
phone numbers assigned to the number keys 2 to 9 by
pressing and holding the corresponding number key.
● Call waiting — Select Activate to have the network
notify you of an incoming call while you have a call in
progress (network service). See "Answer or reject a
call," p. 20.
● Summary after call — Select On to briefly display the
approximate duration after each call.
● Send my caller ID — Select Yes to show your phone
number to the person you are calling (network service).
To use the setting agreed upon with your service
provider, select Set by network.
● Outgoing call line — to select the phone line 1 or 2
for making calls if supported by your SIM card (network
service)
Phone
Select Menu > Settings > Phone and from the
following options:
● Language settings — To set the display language of
your device, select Phone language. Automatic
selects the language according to the information on
the SIM card. To select the USIM card language, select
SIM language. To set a language for the voice
playback, select Recognition lang.. See "Enhanced
voice dialing," p. 20.
Cyan
Magenta
Yellow
Black
40
To Next Page
Loading...
