2 Getting Started
2.1 Starting Smart IM
Press the (Menu) key to switch to the main applications menu of your
device. Navigate through the menu using the joystick until the Smart IM icon
is selected, and press the joystick.
If the Smart IM icon does not appear in the applications menu, please refer to
chapter 6 for installation instructions.
An introduction screen is displayed while Smart IM starts, immediately
followed by the Login
screen (See 2.2).
2.2 How to Log In
Smart IM maintains a permanent connection with the Smart server. The
server provides information about users and delivers instant messages
between them. To enjoy these services, you must log into the Smart server
and identify yourself; this can be done in the Login
screen.
Three data fields appear in the Login
screen: Username, Password and
Auto Login. Use the joystick to navigate through these fields; to modify the
contents of a field, select it and press the joystick.
• Start by filling in your Username and Password in the appropriate fields.
If you are not familiar with these data, please consult your administrator;
in most cases, your user name is simply your email address.
• The Auto Login field can be set either On or Off. When set On, Smart
IM will automatically log in immediately after the application starts.
To Next Page
Loading...
