RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 119
26-6527-222 Alc-Standby-lps After a stateless redundancy event this attribute can be used to inform the
home aware pool of which addresses where in use before failure. The
pool will set these addresses aside and not use them for dynamic
allocation. Only devices explicitly requiring this IP, for example via data
trigger or DHCP renew, will get this IP address assigned. After a
configurable time (configure subscriber-mgmt brg-profile profile-name
dhcp-pool standby-ip-lifetime) all addresses that are still in standby will
be returned to the pool and made available for dynamic allocation. This
VSA only applies when the pool is initially created, any further changes
will be ignored.
Table 35 vRGW (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
