RADIUS Attributes Reference
254
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
2.3.7 Dynamic Data Service accounting
This section specifies the attributes for RADIUS accounting on dynamic data service
SAPs. The attributes for RADIUS accounting of the associated control channel is
identical as the ESM accounting case (see section Enhanced Subscriber
Management (ESM) accounting.
Table 78 Dynamic Data Service Accounting (Description)
Attribute ID Attribute Name Description
1 User-Name Dynamic data services associated with an ESM control channel:
• The RADIUS user-name from the Dynamic Data Service
Control Channel associated with this Dynamic Data Service
SAP accounting session
Dynamic data services associated with a dynamic service data trigger:
• The dynamic data services sap-id
4 NAS-IP-Address The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv4.
The address is determined by the routing instance through which the
RADIUS server can be reached:
“Management” — The active ipv4 address in the Boot Options File (bof
address ipv4-address)
“Base” or “VPRN” — The ipv4 address of the system interface
(configure router interface system address address).
The address can be overwritten with the configured source-address
(configure aaa radius-server-policy policy-name servers source-
address ip-address)
25 Class (Dynamic Data Services associated with an ESM control channel only)
The Class attributes from the Dynamic Data Service Control Channel
associated with this Dynamic Data Service SAP accounting session
32 NAS-Identifier A string (configure system name system-name) identifying the NAS
originating the Accounting requests.
40 Acct-Status-Type Indicates whether this Accounting-Request marks the beginning of the
user service (Start) or the end (Stop) or reports interim updates.
41 Acct-Delay-Time Indicates how many seconds the client has been trying to send this
accounting record for. This attribute is included with value 0 in all initial
accounting messages.
44 Acct-Session-Id Unique generated hexadecimal number that represents the accounting
session for this Dynamic Data Service SAP.
To Next Page
Loading...
