Nokia 7750 - 2.4.2 WLAN-GW migrant users Identification Attributes; 2.4.3 Distributed Subscriber Management (DSM) UE Identification Attributes; 2.4.4 IPSec Tunnel Identification Attributes

RADIUS Attributes Reference
270
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
2.4.2 WLAN-GW migrant users Identification Attributes
Table 87 details the attribute that can be used in a CoA and Disconnect Message to
target migrant users. A Disconnect Message removes any existing migrant state for
the specified UE. A CoA can only be sent for a UE in portal state to trigger the
creation of an ESM or DSM user. In contrast to most CoAs this update is not
incremental: the CoA must include all required authentication attributes to create the
user. The applicability of attributes is the same as for an Access-Accept message in
an authentication procedure.
2.4.3 Distributed Subscriber Management (DSM) UE
Identification Attributes
Table 88 details the different attributes that can be used in a CoA and Disconnect
Message to identify a single DSM UE.
2.4.4 IPSec Tunnel Identification Attributes
Table 89 details the different attributes that can be used in a Disconnect Message to
identify one or multiple IKEv2 remote-access tunnel(s).
Table 87 CoA and Disconnect Message: WLAN-GW Migrant Users
Identification Attributes
Attribute ID Attribute Name Notes
1 User-Name Must be MAC format
Table 88 CoA and Disconnect Message: DSM UE Identification Attributes
# (priority) Attribute ID Attribute Name Notes
1 44 Acct-Session-Id —
2 1 User-Name Must be MAC
format