RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 261
2.3.9 Accounting Terminate Causes
Table 84 specifies the different Terminate Causes generated by the SR OS in [49]
Acct-Terminate-Cause attribute. An overview of different Enhanced Subscriber
Management (ESM) Error Codes and their mapping to the Accounting Terminate
Cause can be shown with the CLI command: tools dump aaa radius-acct-
terminate-cause.
44 Acct-Session-Id string 22 Bytes Example:
Acct-Session-Id =
“2128463592102512113409”
61 NAS-Port-Type integer 4 Bytes
value 5 fixed
Fixed set to value virtual (5)
Example:
NAS-Port-Type 00000005
95 NAS-IPv6-
Address
ipv6addr 16 Bytes Example: NAS-IPv6-Address = 2001:db8::1
2 6 - 65 2 7 -6 T i m e t ra - C md s t r in g 2 5 a t t ri b u t e s
247 chars/
attribute
Example:
Timetra-Cmd += configure router isis;show
subscriber-mgmt sub-profile
Timetra-Cmd += show router
Table 82 CLI User Access Accounting (Limits) (Continued)
Attribute ID Attribute Name Type Limits SR OS Format
Table 83 CLI User Access Accounting (Applicability)
Attribute ID Attribute Name Acct Start Acct Stop
1 User-Name 1 1
4 NAS-IP-Address 0-1 0-1
31 Calling-Station-Id 1 1
44 Acct-Session-Id 1 1
61 NAS-Port-Type 1 1
95 NAS-IPv6-Address 0-1 0-1
26-6527-6 Timetra-Cmd 1 1
To Next Page
Loading...
