Nokia 7750 - 2.3.2 Distributed Subscriber Management (DSM) Accounting

RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 225
2.3.2 Distributed Subscriber Management (DSM)
Accounting
In Distributed Subscriber Management (DSM), a single accounting session per UE
is started. A unique Accounting-Session-ID per UE is generated. An Acct-Multi-
Session-Id is also generated but currently not used to link any accounting sessions.
Acct-Status-Type and Acct-Session-Id are always included by default. The presence
of all other attributes is dictated by configuration (config>aaa>isa-radius-policy
name acct-include-attributes). Unless otherwise stated in a note, the attribute
description and limits are the same as for Enhanced Subscriber Management (ESM)
Accounting (Table 62 and Table 63), Table 65 provides an overview of the
applicability of the attributes in DSM accounting messages.
Accounting On and Accounting Off messages are generated when a server is
enabled or disabled in an isa-radius-policy (config>aaa>isa-radius-policy name
servers id>[no] shutdown). An accounting-On will also be generated every 5
minutes for a RADIUS server that is unresponsive.
Table 65 Distributed Subscriber Management Accounting (Applicability)
Attribute ID Attribute Name Acct
Start
Acct
Stop
Acct
Interim-
Update
Acct On
(*)
Acct Off
(*)
1 User-Name 0-1 0-1 0-1 0 0
5 NAS-Port 0-1 0-1 0-1 1 1
8 Framed-IP-Address 0-1 0-1 0-1 0 0
9 Framed-IP-Netmask 0-1 0-1 0-1 0 0
25 Class 0+ 0+ 0+ 0 0
30 Called-Station-Id 0-1 0-1 0-1 0-1 0-1
31 Calling-Station-Id 0-1 0-1 0-1 0 0
32 NAS-Identifier 0-1 0-1 0-1 0-1 0-1
40 Acct-Status-Type 1 1 1 1 1
41 Acct-Delay-Time 0-1 0-1 0-1 0 0
42 Acct-Input-Octets 0-1 0-1 0-1 0 0
43 Acct-Output-Octets 0-1 0-1 0-1 0 0
44 Acct-Session-Id 1 1 1 1 1