RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 165
The different sets of volume accounting attributes that can be included in the
Accounting Interim and Stop messages are controlled via include-radius-attribute
CLI commands. Multiple volume reporting types can be enabled simultaneously:
configure
subscriber-mgmt
radius-accounting-policy <name>
include-radius-attribute
[no] detailed-acct-attributes # 64 bit per queue/policer counters
[no] std-acct-attributes # 32 bit aggregate counters (v4+v6)
[no] v6-aggregate-stats # 32 bit aggregate counters (v6 only)
Table 61 Accounting Statistics Type
Accounting Mode Statistics Type
host-accounting interim-update
session-accounting interim-update [host-update]
session-accounting host-update
queue-instance-accounting interim-update
Time and volume based accounting
host-accounting
session-accounting
queue-instance-accounting
Time based accounting
Table 62 Enhanced Subscriber Management Accounting (Description)
Attribute ID Attribute Name Description
1 User-Name Refers to the user to be authenticated in the Access-Request. The
format for IPoE/PPPoE hosts depends on configuration parameters
pppoe-access-method, ppp-user-name or user-name-format in the
CLI context configure subscriber-mgmt authentication-policy
name. The format for ARP-hosts is not configurable and always the host
IPv4-address. The RADIUS User-Name specified in an Access-Accept
or CoA is reflected in the corresponding accounting messages. The
attribute is omitted in accounting via configure subscriber-mgmt
radius-accounting-policy name include-radius-attribute no user-
name.
To Next Page
Loading...
