RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 227
Note:
1. The attributes are included for AA-sub stats when enabled via "configure
service vprn|ies service-id subscriber-interface ip-int-name group-interface
ip-int-name wlan-gw vlan-tag-ranges range start [0..4096] end [0..4096]
distributed-sub-mgmt collect-aa-acct-stats" and explicitly included as
"configure aaa isa-radius-policy name acct-include-attributes" with "octet-
counters" for octet counter and "frame-counters" for packet counters. The
description and limits are detailed in Table 75 and Table 76 in the Application
Assurance (AA) Accounting section.
2.3.3 Subscriber Service Accounting
This section specifies the attributes for RADIUS accounting on subscriber service
instances. The attributes included in the subscriber service accounting messages
are identical to the attributes that are included in the associated parent subscriber
session accounting (Host accounting mode for IPoE host and Session accounting
mode for PPPoE and IPoE sessions). Volume counters are always reported in
standard attributes. Differences for attribute content and additional attributes are
detailed in Table 66.
26-6527-148 Alc-RSSI 0-1 0-1 0-1 0 0
26-6527-163 Alc-Acct-Triggered-Reason 0 0 0-1 0 0
26-6527-184 Alc-Wlan-Ue-Creation-Type 0-1 0-1 0-1 0 0
26-6527-191 Alc-ToServer-Dhcp6-Options 0-1 0-1 0-1 0 0
26-6527-206 Alc-Wlan-SSID-VLAN 0-1 0-1 0-1 0 0
Table 65 Distributed Subscriber Management Accounting (Applicability) (Continued)
Attribute ID Attribute Name Acct
Start
Acct
Stop
Acct
Interim-
Update
Acct On
(*)
Acct Off
(*)
Table 66 Subscriber Service Accounting (Description)
Attribute ID Attribute Name Description
42 Acct-Input-Octets octets received for this subscriber service instance. Only included if
stats-type is set to volume and time.
43 Acct-Output-Octets octets send for this subscriber service instance. Only included if stats-
type is set to volume and time.
To Next Page
Loading...
