Nokia 7750 - Page 228

RADIUS Attributes Reference
228
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
44 Acct-Session-Id Unique generated hexadecimal number that represents the accounting
session for this Subscriber Service instance.
47 Acct-Input-Packets packets received for this subscriber service instance. Only included if
stats-type is set to volume and time.
48 Acct-Output-Packets packets send for this subscriber service instance. Only included if stats-
type is set to volume and time.
50 Acct-Multi-Session-Id Accounting session id of the parent PPPoE/IPoE session (session acct-
session-id) or IPoE host (host acct-session-id). The format (variable
length description or fixed 22B hexadecimal number) is identical to the
parent PPPoE/IPoE session or IPoE host and determined by session-
id-format in the radius-accounting- policy (configure subscriber-mgmt
radius-accounting-policy policy-name session-id-format {number |
description}).
52 Acct-Input-
Gigawords
indicates how many times (one or more) the [42] Acct-Input-Octets
counter has wrapped around 2^32 in the course of delivering this
service. Only included if its value is different from zero and stats-type is
set to volume and time.
53 Acct-Output-
Gigawords
indicates how many times (one or more) the [42] Acct-Input-Octets
counter has wrapped around 2^32 in the course of delivering this
service. Only included if its value is different from zero and stats-type is
set to volume and time.
26-6527-151 Alc-Sub-Serv-
Activate
Activate a subscriber service. The attribute typically contains
parameters as input for the Python script that populates the subscriber
service data structure (sub_svc). The attribute is ignored if not used in
Python. The parameters can cross an attribute boundary. The
concatenation of all Alc-Sub-Serv-Activate attributes with the same tag
in a single message is typically used as a unique subscriber service
instance identifier (key). In subscriber service RADIUS accounting
messages, the attribute is sent untagged and contains the subscriber
service data structure sub_svc.name value used at service activation.
Multiple attributes may be present if the total length does not fit a single
attribute.
Table 66 Subscriber Service Accounting (Description) (Continued)
Attribute ID Attribute Name Description
Table 67 Subscriber Service Accounting (Limits)
Attribute
ID
Attribute Name Type Limits SR OS Format
42 Acct-Input-Octets integer 4 Bytes Example: Acct-Input-Octets = 5000
43 Acct-Output-Octets integer 4 Bytes Example: Acct-Output-Octets = 2000