Nokia 7750 - Page 164

RADIUS Attributes Reference
164
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
Queue instance accounting (per queue instance):
show service id <svc-id> subscriber-hosts detail
Acct-Q-Inst-Session-Id: 241AFF000000224FE9D801
The Host or Session accounting session id can be included in a RADIUS Access
Request:
configure
subscriber-mgmt
authentication-policy <policy-name>
include-radius-attribute acct-session-id [host|session]
The accounting session ID format that appears in RADIUS accounting messages
can be configured to a fixed 22 byte hexadecimal number format or a variable length
description format:
configure
subscriber-mgmt
radius-accounting-policy <policy-name>
session-id-format {description | number}
An Acct-Multi-Session-Id is included in all RADIUS accounting messages (start/stop/
interim):
The reporting of volume counters in accounting is coupled to the sending of periodic
or host triggered Accounting Interim Updates messages. Volume based accounting
is therefore enabled via the interim-update CLI parameter for all accounting modes
and/or by the host-update CLI parameter in session accounting mode as shown in
Table 61.
Table 60 Enhanced Subscriber Management Accounting [50] Acct-Multi-Session-Id Values
queue-instance-
accounting
host-accounting session-
accounting
[50] Acct-Multi-Session-Id
✓ x x Not present
x ✓ x Queue Instance Acct-Session-Id
xx✓ Queue Instance Acct-Session-Id
✓✓x Queue Instance Acct-Session-Id
✓ x ✓ Queue Instance Acct-Session-Id
x ✓✓Session Acct-Session-Id