RADIUS Attributes Reference
224
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
Notes:
1. On acct-on/off: The table represents the acct-on-off attributes for an accounting server configured
via a radius-server-policy (configure subscriber-mgmt radius-accounting-policy name
radius-server-policy radius-server-policy-name and with acct-on-off enabled. If the accounting
server is configured direct under the radius-accounting-server (configure subscriber-mgmt
radius-accounting-policy name radius-accounting-server server server-index, then the
following attributes are not sent in acct-on/off messages: [44] Acct-Session-Id, [45] Acct-Authentic
and [49] Acct-Terminate-Cause; and attribute [26-6527-12] Alc-Subsc-Prof-Str is sent.
2. For L2TP LAC PPPoE sessions, when the Tunnel Client Attributes are included (configure
subscriber-mgmt radius-accounting-policy name include-radius-attribute tunnel-client-
attrs), the Accounting Start message for Session and Host accounting modes is delayed until all
L2TP tunnel information is available. For Queue-Instance accounting mode, the Accounting Start
is not delayed and the Tunnel Client Attributes will only be included in the next Accounting Interim
Update or Accounting Stop message.
26-6527-197 Alc-IPv6-Acct-Output-Packets 0 0-1 0-1 0 0 HSQ
26-6527-198 Alc-IPv6-Acct-Output-Octets 0 0-1 0-1 0 0 HSQ
26-6527-199 Alc-IPv6-Acct-Output-Gigawords 0 0-1 0-1 0 0 HSQ
26-6527-206 Alc-Wlan-SSID-VLAN 0-1 0-1 0-1 0 0 H->S->Q
26-25053-2 Ruckus-Sta-RSSI 0-1 0-1 0-1 0 0 HSQ
Table 64 Enhanced Subscriber Management Accounting (Applicability) (Continued)
Attribute ID Attribute Name
Acct Start
Acct Stop
Acct Interim-Update
Acct On
1
Acct Off
1
Acct Reporting Level
To Next Page
Loading...
