RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 255
46 Acct-Session-Time The acct session time is started when the corresponding dynamic data
service sap is created. The acct session time is stopped when the
corresponding dynamic data service sap is deleted. When the SAP is
orphaned (not deleted in the teardown function call), the session time
stops after the teardown script is executed. In case an accounting stop
is sent as a result of a failure scenario, the acct-session-time will be
zero.
49 Acct-Terminate-
Cause
Indicates how the accounting session was terminated
50 Acct-Multi-Session-Id Dynamic data services associated with and ESM control channel:
• Accounting session ID of the associated Control Channel
(session acct-session-id for PPPoE or IPoE sessions and
host acct-session-id for IPoE hosts)
Dynamic data services associated with a dynamic service data trigger:
• Accounting session id of the associated dynamic services
data trigger (send in Access-Request in case of RADIUS
authentication)
55 Event-Timestamp Record the time that this event occurred on the NAS, in seconds since
January 1, 1970 00:00 UTC
87 NAS-Port-Id The Dynamic Data Service SAP where this accounting session is
started for
95 NAS-IPv6-Address The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv6.
The address is determined by the routing instance through which the
RADIUS server can be reached:
“Management” — The active ipv6 address in the Boot Options File (bof
address ipv6-address)
“Base” or “VPRN”— The ipv6 address of the system interface
(configure router interface system ipv6 address ipv6-address).
The address can be overwritten with the configured ipv6-source-
address (configure aaa radius-server-policy policy-name servers
ipv6-source-address ipv6-address)
26-3561-1 Agent-Circuit-Id (Dynamic Data Services associated with an ESM control channel only)
The Agent-Circuit-Id attribute from the Dynamic Data Service Control
Channel associated with this Dynamic Data Service SAP accounting
session
Table 78 Dynamic Data Service Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
