RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 121
26-6527-225 Alc-BRG-Id In session authentication, reflects the BRG identifier of the associated
BRG (if known) in Access-Request.
In BRG authentication, reflects the BRG identifier (if known), in the Access
Request.
Can also be used as key to target a specific BRG with a CoA/Disconnect
message.
26-6527-235 Alc-BRG-DHCP-
Streaming-Dest
When specified in authentication, DHCPv4 messages (UDP layer) from all
sessions for that BRG will be mirrored to this destination. If a valid non
0.0.0.0 value is provided for the destination address, then streaming is
enabled for the BRG (i.e. for all sessions associated with the BRG).
Streaming can be disabled at the BRG level by including this VSA with
value 0.0.0.0.
26-6527-236 Alc-Host-DHCP-
Streaming-
Disabled
(Applies to session level authentication of a session associated with a
BRG or CoA targeted to a session in a vRGW context.)
This attribute controls the DHCPv4 streaming per session. A value of 1
disables DHCPv4 streaming for the session, and value of 0 enables it.
26-6527-238 Alc-Remove-
Override
(Applies to CoA targeted to a session in a vRGW context.)
This attribute refers to another VSA of which the value on session level
must be removed and fall back to BRG level value. If there is no BRG level
value present the CoA will fail.
26-6527-241 Alc-Per-Host-
Port-Range
This attribute is used to enable or disable per-host outside port-range
allocation for vRGW. When present, this attribute indicates how many
ports should be available in each per host range. A value of zero disables
per-host port range allocation. This attribute can only be used if a single
block per nat outside IP is provisioned via configure router | service
vprn service-id nat outside pool nat-pool-name port-reservation
blocks 1.
Table 35 vRGW (Description) (Continued)
Attribute ID Attribute Name Description
Table 36 vRGW (Limits)
Attribute
ID
Attribute Name Type Limits SR OS Format
1 User-Name string 32 chars Example:
User-Name = “00:01:02:03:04:05”
2 User-Password string 64 Bytes Encrypted
password
Example: User-Password =
“4ec1b7bea6f2892fa466b461c6accc00”
To Next Page
Loading...
