RADIUS Attributes Reference
146
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
30 Called-Station-Id string 253 bytes # local gateway address of IKEv2
remote-access tunnel.
Example: Called-Station-Id =
“172.16.100.1”
31 Calling-Station-Id string 253 bytes # peer-address:port
Example: Calling-Station-Id =
“192.168.5.100:500”
44 Acct-Session-Id string 147 bytes # local_gw_ip-
remote_ip:remote_port-time_stamp.
Example: Acct-Session-Id =
172.16.100.1-192.168.5.100:500-
1365016423
46 Acct-Session-Time integer 4 bytes
4294967295
seconds
Example: Acct-Session-Time = 870
79 EAP-Message string 253 bytes Binary string
80 Message-Authenticator string 16 bytes Binary string
87 Nas-Port-Id string 44 bytes # SAP-ID
Example:
Nas-Port-Id = “tunnel-1.public:100”
88 Framed-Pool string 32 chars per
pool name
Example:
Framed-Pool = "MyPoolname"
97 Framed-IPv6-Prefix ipv6prefix max. 16
Bytes for
prefix + 1 byte
for length
Example:
Framed-IPv6-Prefix =
2001:DB8:CAFE:1::100/128
100 Framed-IPv6-Pool string 32 chars Example:
Framed-IPv6-Pool =
"MyV6Poolname"
26-311-16 MS-MPPE-Send-Key string 254 bytes Binary string
26-311-17 MS-MPPE-Recv-Key string 254 bytes Binary string
26-6527-9 Alc-Primary-Dns ipaddr Up to 4
attributes (4B
per attribute)
Example:
Alc-Primary-Dns = 192.168.1.1
Table 49 IPSec (Limits) (Continued)
Attribute ID Attribute Name Type Limits SR OS Format